Controls / Display; Language; Consumption; Code - Miele WCR 860 WPS Operating Instructions Manual

Settings
Controls / Display 
Language 
The display can be set to appear in
one of several different languages.
The flag  after the word Language
(Sprache in German) acts as a guide in
case a language which is not
understood has been set.
The language selected is saved.

Consumption

In this setting you can check the
saved energy and water consumption
values and enter the energy cost.
Options
–
Previous programme
Shows the consumption for the last
wash programme carried out.
– Total consumption
Shows the sum of the energy and the
sum of the water used by the
previous programmes.
– Set the cost
You can enter the cost for energy
(electricity) and water.
100

Code

The code prevents the washing
machine being used without your
knowledge.
Options
– Activate
If you activate the code, you have to
enter a code after switching the
washing machine on. Otherwise it
cannot be operated.
The factory default code is 125.
– Change
If wished, you can set a different
three-digit code.

Do not forget the code you have
set.
If you forget the code, only Miele
Technical Service can unlock the
washing machine.
Make a note of your new code.
–
Deactivate
The washing machine is to be
operated again without entering a
code. This only appears if the code
had been activated previously.