Location Selection - TESTO 645 Instruction Manual

info@Testo-Direct.com
M.05 N.0017
MAN
1:
m/s
1. Current
58. 0 6
measurement
1: hPa
21. 8 0
ESC
Location
Location
01
Duct 1
The cross-section
can only be called up if
volume flow is activated
(testo 445 instrument)
Return to current
measurement
www.
The location names Location 1 to 99 are specified by the factory.
Additional location names (8 characters) can only be loaded onto
your instrument using PC software.
/ Select location
A
cm
50. 0
B
cm
50. 0
or :
From now on all measured data which is saved or printed is
linked to the selected location or product names.
14
Testo-Direct

3. Location selection

Increase value
Decrease value
Select digit box
Use ESC to go
ESC
Location
to selection of
cross-section entry
Ø AxB, m2, Funnel)
Increase value
Decrease value
Select digit box
1.888.610.7664
.com