Clean Valve; System Settings; Configuration - BAQ kaloMAX NT II Manual

BAQ kaloMAX NT II
Use the ▲ and ▼ cursor keys to select the required data record from the list of
available grinding parameters and delete it by pressing ENTER.
5.7

Clean valve

For valve cleaning, the valve has to be open for the duration of dosage. There are two
options:
1. Select menu item Clean valve.
2. If no measurement is in progress, press the STOP button on the main screen (in
case a measurement is in progress when the STOP button is pressed, this causes
the measurement to abort).
5.8

System settings

Selecting System on the menu opens a sub-menu with the following sub-items:
Configuration – Setting the input units for speed and path.

Language – Selection of the language.

Factory settings – Reset to default.

Information – Display of system information.

5.8.1

Configuration

The unit of grinding speed and grinding path can be selected in the system
configuration.
5.8.1.1 Speed
The following units can be selected for speed:
Ball revolutions / 1/min

Grinding speed / m/min

Shaft revolutions / 1/min

Manual
Page 21