Manage Grinding Parameters; Change Parameters; Save Parameter; Load Parameter - BAQ kaloMAX NT II Manual

BAQ kaloMAX NT II
5.6

Manage grinding parameters

5.6.1

Change parameters

Grinding speed, grinding path, dosage time and ball diameter can be changed
in the main screen by pressing the corresponding function key or
–
by selecting the appropriate menu item in the sub-menu Grinding parameter /
–
Edit.
The unit in which the grinding speed and the grinding path have to be entered are
determined in the system configuration (see chapter 5.8.1).
In any case, an input screen appears, where the value of the parameter can be
changed.
5.6.2

Save parameter

Under the menu item Grinding parameter / Save, the current grinding parameters can
be saved with a chosen name.
After selection of the menu item, a text input screen comes up where the user can
enter the new data record name.
5.6.3

Load parameter

Under menu item Grinding parameter / Load, it is possible to retrieve the stored
grinding parameters.
Use the ▲ and ▼ cursor keys to select the required data record from the list of
available grinding parameters and load it by pressing ENTER.
5.6.4

Delete parameter

If a stored grinding parameter record is not required any more, it can be deleted under
menu item Grinding parameter / Delete.
Manual
Page 20