Table of Contents
Advertisement
BAQ kaloMAX NT II
5.4
Main screen
Press the START button on the main screen to start the grinding process.
The current parameters are displayed and can be changed after pressing the
corresponding function key. If a set of parameters is loaded, the data record name is
indicated in lower left corner of the screen. Changing the parameters in the main
screen has no effect on the stored parameters.
If no grinding operation is in progress, the valve can be cleaned by pressing the STOP
key.
5.5
Menu
Press ESC when the main screen is visible to enter the menu. In the menu, you can
choose the following items:
Grinding – the main screen is shown.
Grinding parameters – display of the sub-menu for grinding parameter setting and
managing.
Clean valve – opens the valve for the dosage time.
System – display of sub-menus for system settings.
Manual
Page 19
Advertisement
Table of Contents
