Safety Precautions - RBC Bioscience MagCore Plus II Operation Manual

Safety Precautions

Before Use
WARNINGS and CAUTIONS stated below are intended to protect the individual from injuries
and avoid damage to machines.
CAUTIONS
Risk Of Electric Shock
CAUTION:
To reduce the risk of electric shock, do not remove the cover. Refer to qualified
service technician for inner part servicing.
Waning: Electricity
General Warning. Please follow the instruction for operation,
be aware of electrical hazard caused by inappropriate
operation.
1. Power Supply
2. Barcode Scanner
Warning: Biological Hazard
Warning: High Temperature
Please read the instruction carefully and keep for future
reference.
This product is confirmed with European Union conformity
assessment regulations regarding health and safety or
environmental protection.
CAUTION:
1. Handle The Power Supply Cord Carefully
Do not damage or twist the power supply cord. Damaged or twisted cord may
cause electric shock or error when used. When you remove it from the outlet, be
sure to remove by holding the plug and not by pulling the cord.
2. Do Not Place Anything Inside
Do not place metal objects inside the MagCore® System and wipe away all spilled
liquid to minimize the risk of system error and electric shock.
NOTE ON USE:
Avoid high temperatures.
Leave space for sufficient heat dissipation during installation.
Handle the power cord carefully.
Hold the plug when unplugging the cord.
Keep the set free from moisture,
liquid, and dust.
Unplug the power cord if the system
will not be used again in a long time.
Do not obstruct the ventilation space.
Do not let insecticides, benzene, and
thinner come in contact with the set.
Do not ever disassemble or modify
the set in any way.
Do not let foreign objects in the set.
www.rbcbioscience.com
1
Do Not Open
SAFETY INSTRUCTIONS
1. Read Instructions – All the safety and operating instructions should be read before
operating the instrument.
2. Keep the Instructions – Please keep the safety and operating instruction manual for
future reference.
3. Cautions and Warnings – All warning signs should be attached on the product and
shown in the user's manual.
4. Follow Instructions – All operating and use instructions should be followed.
5. Cleaning – Unplug the product before cleaning. Use only 75% of EtOH to clean the
surface of instrument.
6. Attachments – Do not attach anything on the instrument.
7. Liquid and Moisture – Do not use this product near water and avoid moist areas -
bath tub, wash bowl, kitchen sink, laundry, swimming pool or in a moist basement.
8. Proper Installation – Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall and caues serious injury to a child or adult, and
serious damage to the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product. Any mounting of the
product should follow the manufacturer' s instructions, and should use a mounting
tool recommended by the manufacturer.
9. Ventilation – Slots and openings in the cabinet are designed for ventilation, which
is required for safe operation and minimizing the chance of overheating. The product
should be placed on a hard surface to ensure proper ventilation. This product should
not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is ensured or instructed by the manufacturer.
10. Power Sources – This product should be operated only from the type of power
source indicated on the label. If you are not sure of the type of power supply at your
lab, consult the seller or local power company. For products intended to operate from
battery or other sources, refer to the operating instructions.
11. Grounding or Polarization – This product may be equipped with a polarized
alternating-current plug. This plug will fit into the power outlet in one way only. This is
a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
12. Power-Cord Protection – Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed near or against them. Pay extra
attention to the plugs, convenience receptacles, and the connecting point where the
cord extends out of the product.
13. Lightning – Unplug the product if it will not be used again for a long period or in the
case of a heavy storm. This will prevent damage to the product due to lightning and
power surges.
14. Overloading – Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
15. Object and Liquid Entry – Never push objects of any kind into this product as they
may touch dangerous voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
16. Servicing – Do not attempt to repair this product by yourself. Refer all servicing to
qualified service technician.
17. Damage Requiring Service – Unplug this product from the wall outlet and refer
servicing to qualified service technician under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally following the operating instructions.
Adjust only controls covered by the operating instructions as an improper adjustment
of other controls may result in damage and will often require extensive work by a
qualified technician to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance
– this indicates a need for service.
18. Replacement Parts – When replacement is required, be sure the service technician
uses replacement parts specified by the manufacturer or those with similar features
as the original part. Unauthorized substitutes may result in fire, electric shock, or other
hazards.
19. Safety Check – Upon completion of any shipment, storage, installation or
maintenance service to this product, ask the service technician perform safety checks
to confirm that the products is in proper operating condition.
20. Heat – The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products that produce heat.
21. Moving Product - The machine requires two people lifting from both side at the
bottom edge. Do not attempt to lift by bending forward. Bend your hips and knees to
squat down, keep the machine close to your body, and straighten your legs to lift.