Start Programs - RBC Bioscience MagCore Plus II Operation Manual

━ Start Programs

Please pretreat the sample according to the
instructions of the user manual of the MagCore®
Kit and put consumables into the machine.
Press Start to go to the next step.
To Select User and Scan Barcodes: See Page 12
Select User
Jemes
Back
Select
Press next to choose the code number.
Please confirm the reagent set code number to be
used in the extraction.
Select the number of the cartridge.
!
The number
can be found in the
sticker on the cartridge.
Scan Sample Scan Elution Tube
Scan Kit LOT
Next
01/31/2019 13:15:47 13:1 47 13:15:47
Select DNase Treatment. (Only for RNA kit.)
Select Sample Volume.
Select Elution Buffer. (Only for tissue kit.)
If you need to save this setting, please
refer to page 11 to know how to save
customized settings.
Close door and press Start.
MagCore® Plus II
10