Security Settings - Supermicro Supero X8DAi User Manual

X8DA3/X8DAi User's Manual
Clear event log
This option clears the Event Log memory of all messages. The options are OK
and Cancel.
4-4

Security Settings

The AMI BIOS provides a Supervisor and a User password. If you use both pass-
words, the Supervisor password must be set fi rst.
Supervisor Password
This item indicates if a Supervisor password has been entered for the system. "Not
Installed" means a Supervisor password has not been used.
Main Advanced
Security Settings
Supervisor Password : Not Installed
User Password
Change Supervisor Password
Change User Password
Boot Sector Virus Protection
User Password
This item indicates if a user password has been entered for the system. "Not In-
stalled" means that a user password has not been used.
Change Supervisor Password
Select this feature and press <Enter> to access the submenu, and then enter a
new Supervisor Password.
User Access Level (Available when Supervisor Password is set as above)
Use this feature to set the user's access level. The options are:
•
Full Access : grants full User read and write access to the Setup Utility,
•
View Only: allows access to the Setup Utility, but cannot change the fi leds,
•
Limited: allows only limited fi elds to be changed such as Date and Time,
•
No Access: prevents User access to the Setup Utility.
BIOS SETUP UTILITY
Security
Boot Exit
: Not Installed
[Disabled]
vXX.XX (C) Copyright 1985-2009, American Megatrends, Inc.
4-20
Install or Change the
password.
Select Screen
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit