Supermicro Supero X8DAi User Manual page 29

Installing and Removing DIMMs
X8DA3/i
To Remove:
Use your thumbs
to gently push
the release tabs
near both ends of
Release Tab
the module. This
should release it
from the slot.
DIMM DDR3
Notch
Note: Notch
Release
should align
Tab
with the
receptive point
on the slot
To Install: Insert module vertically and press down until it
snaps into place. Pay attention to the alignment notch at
the bottom.
2-9
Chapter 2: Installation
Notch
Release
Tab
3
Release Tab