Panasonic WV-X6533LN Important Information Manual page 30

Symptom
The power cable insu-
lation is damaged.
The power cable,
plug and connectors
get hot during use.
The power cable gets
hot when bent or
stretched.
It is hard to see
images with the cam-
era when there are
raindrops on the front
panel.
The image refresh
interval on the web
browser is longer or
the image is dis-
played intermittently.
Normal PAN and TILT
operations are not
made even when the
power supply to the
camera has been
turned on.
A sound comes from
the camera.
Cause/solution
• The power cable and connectors are worn out.
This may result in electric shock or a fire.
Unplug the power cable from the power source imme-
diately, and refer to qualified service personnel.
• The effectiveness of the rain wash coating may have
been reduced. Refer to "Cleaning of the front panel" in
"Precautions for use" and clean the front panel. If the
situation does not improve contact your dealer.
• When the camera is set to high frame rate and high
image quality, and the hardware decode functions of
the PC are to be used, the updating of the screen gets
delayed due to the specifications of the CPU or mem-
ory of the PC.
These cases may be improved by using a PC with the
following specifications.
® TM
CPU: Intel Core
Memory: 4 GB (2 GB x 2, dual channel) or more rec-
ommended
【Example of using the camera in case that the image
refresh interval is longer or intermittent】
• Image capture size: 1920×1080, Frame rate: 60 fps,
Bit rate: 4096 kbps
• Image capture size: 1280×720, Frame rate: 60 fps,
Bit rate: 3072 kbps
• Image capture size: 1280×720, Frame rate: 30 fps,
Bit rate: 2048 kbps
(When referring to multiple browsers 4 images or
more)
• Have you not turned on the camera with the fixing
tapes still adhered on the camera?
Immediately turn off the power supply of the camera,
remove the fixing tape adhered to the horizontal and
vertical rotation portions of the camera, and then turn
on the power again.
A sound coming from the camera does not mean it has
developed a problem. If the fixing tape is removed and
the power supply is turned on again, the camera
returns to normal operation.
i7-6700 or faster recommended
30
Reference
pages
−
12
6
Installation
Guide