Panasonic WV-X6533LN Important Information Manual page 26

【2】 Insert an SD memory card.
Step 1
Open the SD slot cover
Loosen 2 SD slot cover fixing screws
(M4) at the rear part of the camera
unit using a Phillips screwdriver, and
open the SD slot cover.
Step 2
Insert an SD memory card
• Insert an SD memory card in the SD
slot. Push in straight until the end
and confirm that a clicking sound is
heard.
• Take your fingers off the SD memory card
and check that its back end does not
protrude over the SD guide rib.
Step 3
Attach the SD slot cover to its original
position.
Attach the SD slot cover again.
Recommended tightening torque of the
screws: 1.38 N·m {1.02 lbf·ft}
slot cover fixing
【3】 Exit from the "Insert/Remove SD memory card" mode if it has been started.
<How to exit from the "Insert/Remove SD memory card" mode>
①
Click the [Exit] button of [Insert/Remove SD memory card] in the bottom-most part of the [SD
Memory card] tab.
②
Normal operations are restored and the panning, tilting, and zooming functions will all start to
function automatically.
SD slot cover fixing screws
SD memory card
(with label facing down)
SD slot cover fixing screws
SD
26
SD slot cover
SD slot
SD guide rib
SD slot cover