Panasonic WV-X6533LN Important Information Manual page 22

Connecting to a network using a PoE+ hub /device when the temperature is
–30 °C {–22 °F} or less
When the temperature is –30 °C {–22 °F} or less, use a 24 V AC power supply or a tested PoE
injector.
<Required cable> Ethernet cable (category 5e or better, straight)
Powered
speaker
Confirmation monitor
*
Plug-in power type
microphone
Powered
speaker
Plug-in power type
microphone
IMPORTANT:
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
• If a PoE+ hub is not used, each camera must be connected to a 24 V AC power supply.
• When using 24 V AC, power supply from a PoE+ hub or router is not required.
Ethernet cable
(category 5e or
better, straight)
➡ 24 V AC
power supply
Confirmation monitor
*
* The audio output can be switched to the monitor
output. When using the monitor output, audio
output is not available.
22
Hub, router
Ethernet cable
(category 5e or better, straight)
PC
Tested PoE injector
Ethernet cable
(category 5e or better, straight)