Advertisement
1. Connect the included battery clamps or the DC plug to the wires from the panel by the J-plug
connectors.
2. If using the battrey clamps: Attach the positive battery clamp (red, +) to the positive battery terminal (+)
and the negative battery clamp (black, -) to the negative battery terminal (-).
If using the DC plug: insert the plug into the vehicle's 12-volt power socket.
3.Expose the solar panel to sunlight. The solar panel can be mounted on a windshield using the
included suction cups.
The solar panel will produce a current when exposed to sunlight. Direct sunlight will produce best
results. Diffused or low light will result in lower or no output.
Note: If LED light on the panel is off this only shows that the LED light may have gone out and
is not necessarily indicative of the solar panel not working. Please test the panel with a multimeter
to ensure proper functionality.
Operating Instructions
Page 4 of 6
Advertisement
