Reading In Shot Data - Sony HDW-S2000 Operation Manual

Sony hd digital videocassette recorder operation manual hdw-s2000, hdw-s2000p
Hide thumbs Also See for HDW-S2000:
Table of Contents

Advertisement

6-3 Shot Mark Operations
Cuing up to shot marks adjacent to the
current tape position (index function)
1
In item G01 of the shot mark operation menu
(page 6-3), select one of recording start mark, shot
mark 1, shot mark 2, and post mark, or select all.
2
Holding down the MARK button, press the F FWD
button or REW button.
While the tape is moving, the F FWD button or
REW button flashes.
When the shot mark is detected, its type is displayed in
time data display area 2 (page 2-9) on the lower
control panel and in the character information display
on the monitor screen.
For details of character information display on the monitor
screen, see F4 (CHARA) in function menu page 4 (page 9-7)
and setup menu item 005 (page 10-7).
Note
You cannot use the above procedure to cue up to a
virtual shot mark.

6-3-5 Reading In Shot Data

When there is shot data (time, device, and other
information about the shooting) written on the tape,
you can read it in and display it on the monitor.
Displaying the shot data
Holding down the ENTRY button, press the PLAY
button.
Z
ENTRY button
6-8
Chapter 6 Shot Mark Function
PLAY button
The tape is played back, and the shot data displayed.
To delete the shot data
Once again hold down the ENTRY button, and press
the PLAY button.
Example of shot data display
The shot data display appears as shown below.
MODEL NAME
SERIAL NUMBER
DATE
TIME
CASSETTE NUMBER
SHOT NUMBER
ID1
ID2
Camera IDs
ID3
ID4
Recording
TCR 23:59:59:29
time code
The details in the shot data depend on the shooting
conditions. If because of the devices used there is no
shot data on a part of the tape, it appears as blank.
Displaying the shot data on the shot mark
list
Turn the MULTI CONTROL knob to position the
cursor on a separator in the shot mark list.
If there is shot data recorded when the immediately
following shot mark was written, it appears in the
display as shown below.
Model name (4 characters)
Serial number (6 digits)
SHOT MARK
(---/180)
Shot data
NO.
TIME CODE
*012345-DNW_-0123-4567-
First shot
011
S1
10:04:05:11
mark in the
012
R
10:05:35:24
group
013
V
10:07:05:02
----------------------------
014
R
10:08:35:04
015
S2
10:09:05:11
016
R
10:10:35:24
017
R
10:10:36:00
You can sort the shot marks in the list, based on the shot
data. For details, see the next section.
DNW 0090
010001
1998.05.11
12.55.10
0095
0052
AAAAAAAAAAAA
BBBBBBBBBBBB
CCCCCCCCCCCC
DDDDDDDDDDDD
Model number (4 digits)
Cassette number (4 digits)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdw-s2000p

Table of Contents