Table of Contents
Advertisement
6-1 Overview
This unit can record shot marks or use shot marks
recorded on HDCAM tape. Shot marks are indications
at desired points on a tape which enable faster cuing.
Types of shot mark
This unit supports the following three types of shot
mark. This chapter describes recording start marks and
post marks, treating them as varieties of shot marks.
Shot mark type
Writing on a camcorder,
etc.
Recording start mark Automatically written at the
start of recording.
Shot mark 1 and
Written by a manual shot
shot mark 2
mark operation during
recording or editing.
Post mark
Not written
(Written only by this unit)
First, the shot mark functions of this unit are described
in simple terms.
Shot Mark Function
Writing on this unit
Written or not according to a separate menu
setting for each recording mode (crash recording,
assemble editing, insert editing).
For each mode for which the setting is "ON", the
mark is written automatically at the start of
recording.
Written by a button operation during crash
recording or assemble editing. A menu setting
determines which of three types of mark is
written: shot mark 1, shot mark 2, or post mark.
Written by a button operation during playback,
while stopped, during a search, or during
recording (crash recording or assemble editing).
6
Chapter
Modifying and
deleting on this unit
Possible
Chapter 6 Shot Mark Function
6-1
Advertisement
Table of Contents
