Reading In Shot Data - Sony DNW-A75 BETACAM SX Operation Manual

6-3-5 Reading in Shot Data

When there is shot data (time, device, and other
information about the shooting) written on the tape,
you can read it in and display it on the monitor.
Displaying the shot data
Holding down the ENTRY button, press the PLAY
button.
6 0
PLAY button
ENTRY button
The tape is played back, and the shot data displayed.
To delete the shot data
Once again hold down the ENTRY button, and press
the PLAY button.
Example of shot data display
The shot data display appears as shown below.
MODEL NAME
SERIAL NUMBER
DATE
TIME
CASSETTE NUMBER
SHOT NUMBER
ID1
ID2
Camera IDs
ID3
ID4
Recording
TCR 23:59:59:29
timecode
The details in the shot data depend on the shooting
conditions. If because of the devices used there is no
shot data on a part of the tape, it appears as blank.
%
9 )
p
DNW 0090
010001
1998.05.11
12.55.10
0095
0052
AAAAAAAAAAAA
BBBBBBBBBBBB
CCCCCCCCCCCC
DDDDDDDDDDDD
Displaying the shot data on the shot mark
list
Turn the search dial to position the cursor on a
separator in the shot mark list.
If there is shot data recorded when the immediately
following shot mark was written, it appears in the
display as shown below.
Model name (4 characters)
Serial number (6 digits)
SHOT MARK
(---/180)
Shot data
NO. TIME CODE
*012345-DNW_-0123-4567-
011 S1 10:04:05:11
First shot
012 R 10:05:35:24
mark in the
013 V 10:07:05:02
group
----------------------------
014 R 10:08:35:04
015 S2 10:09:05:11
016 R 10:10:35:24
017 R 10:10:36:00
You can sort the shot marks in the list, based on the shot
data. For details, see the next section.
Chapter 6 Shot Mark Function
Model number (4 digits)
Cassette number (4 digits)
6-7