Connecting Reference Signals - Sony HDW-S2000 Operation Manual

3-2 Reference Sync Signals
Notes
• When there are no HD-SDI signal or SDTI signal
(option) input whereas INPUT is selected for
OUTREF, the unit synchronizes to the input
reference video signal.

3-2-2 Connecting Reference Signals

Connect reference signals as shown below, according
to the way in which the unit is to be used.
• Connections for recording from a switcher or signal generator
HDW-S2000/S2000P
• Connections for recording from an external VTR (player)
Reference signal
REF. VIDEO
INPUT
HDW-S2000/S2000P (recorder)
3-4
Chapter 3 Preparations
75 Ω termination switch: ON
75 Ω termination switch: OFF
HDSDI INPUT
• When there is no reference video signal input
whereas REF is selected for OUTREF, no external
reference signal is used. In this case, the unit
synchronizes to the internally generated reference
signal.
Reference signal
Switcher or signal generator
REF. VIDEO
HDSDI INPUT
INPUT
75Ω
75 Ω termination switch: ON
REF. VIDEO
INPUT
HDW-M2100/M2100P (player)
HDSDI OUTPUT