Recording From The Other Vcr Or Tv - Sony GV-D200 Operating Instructions (primary manual) Operating Instructions Manual

Digital video cassette recorder
Hide thumbs Also See for GV-D200 Operating Instructions (primary manual):
Table of Contents

Advertisement

Recording from the other VCR or TV

Using the A/V connecting cable
You can record a tape from the other VCR or a TV program that has audio/video
outputs. Use your VCR as a recorder.
(1) Insert a blank tape (or a tape you want to record over) into your (recording)
(2) Set the POWER switch to ON.
(3) Press REC and the button on its right simultaneously on your (recording) VCR,
(4) Press H on the other (playback) VCR to start playback if you are recording a
(5) Press X on your (recording) VCR at the scene where you want to start
3
REC
: Signal flow
AUDIO/VIDEO INPUT
When you have finished recording a tape
Press x on both your (recording) VCR and the other (playback) VCR.
Notes
•To enable smooth transition, we recommend that you do not mix pictures recorded in
the Hi8/standard 8 with the Digital8
•If you use fast-forward or slow-playback mode on the other (playback) VCR, the
image being recorded may fluctuate. When you record from the other (playback)
VCR, be sure to play back the original tape at normal speed.
If the other (playback) VCR or TV is a monaural type
Connect the yellow plug of the A/V connecting cable to the video output jack and the
white plug to the audio output jack on the VCR or the TV. (Do not connect the red
plug.) The sound is monaural.
If your TV or the other (playback) VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of both your (recording)
18
VCR and the TV or the other (playback) VCR.
VCR. If you are recording a tape from the other (playback) VCR, insert a
recorded tape into the other (playback) VCR.
then immediately press X on your (recording) VCR. The REC (red) and
PAUSE (orange) lamps light up.
tape from the other (playback) VCR. Select a TV program if you are recording
from TV.
The picture from a TV or the other (playback) VCR appears on the TV screen
or a monitor screen of the other (playback) VCR.
recording from.
The REC lamp remains on and the lamp on the X PAUSE lamp goes off.
PAUSE
S VIDEO IN
A/V connecting cable (supplied)
A/V converting cable (supplied)
S video cable (not supplied)
system on a tape.
OUT
S VIDEO
VIDEO
AUDIO

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digital8 gv-d200

Table of Contents