Recording Tv Programs Using Vcr Plus - Sony SLV-780HF Operating Instructions Manual

Recording TV
programs using VCR
Plus+
POWER
TIMER
CLEAR
VCR Plus+
ONCE
WEEKLY
DAILY
Number
buttons
TAPE
SPEED
Notes
¢ You cannot set VCR Plus+ in
the following cases:
— When the VCR is turned
off.
- While recording using the
timer or quick timer.
¢ The timer will not accept
settings in the following
cases:
— When you select DAILY
for a Saturday and Sunday
program.
— When you select DAILY
or WEEKLY for a program
more than seven days
ahead.
— When you enter the
PlusCode of a program
that has already ended.
This section shows you another way of timer recording: recording using
VCR Plus+. This allows you to record TV programs more easily. Just
enter the program's "PlusCode," and the VCR will automatically record
the program. You can preset up to eight programs within a one month
time frame.
Before you start...
¢ Check that the clock is set correctly.
¢ Insert a tape with its safety tab in place. Make sure the tape is longer
than the total recording time.
* Turn on your TV and tune in to the VCR.
When using a cable box, turn it on.
1 Press VCR Plus+.
If the clock needs to be set, "Please set the
clock" appears on the screen and the VCR
automatically enters the clock setting
mode.
2 Enter the desired program's
PlusCode using the number
buttons.
If you make a mistake, press TIMER
CLEAR and enter the PlusCode again.
VCR: Plusal S| Pluss
PlusCode
TAPE_SPEED
Enter program's PlusCode
using [0-9] keys
To change tape speed,
push [TAPE SPEED]
VOR Plas
PlusCode
TAPE_ SPEED
3]
After entering PlusCode,
push [ONCE|[DATLY],
or [WEEKLY
If you make a mistake,
push [TIMER CLEAR
3 Select the tape speed, SP or EP, by
pressing TAPE SPEED.
4 press ONCE, DAILY or WEEKLY
according to the following:
To record the program
Only once
Monday to Friday at the same scheduled time
Every week at the same scheduled time
PlusCode TAPE _SPEED
After entering
push [ONCEI[DAILY
or [WEEKLY]
Pl usCode,
lf you make a mistake,
push [TIMER CLEAR
Press
ONCE
DAILY
WEEKLY
The recording information appears on the
TV screen: date, program start and stop
times, channel number and tape speed.
Check that the information is correct.
If it is not, press TIMER CLEAR to cancel.
To preset another timer setting, repeat
steps 1 to 4.
Pl usCode
§3292——~
RECORDING TIME
TAPE_SPEED
EP
DATE START _STOP__CH
9/25MON 8 :00PM11:30PM 52 €
To set timer, push |[POWE!
To cance lL.
push [TIMER CLEAR
(continued)
Basic Operations | 45