Sony GV-D200 Operating Instructions (primary manual) Operating Instructions Manual page 29

Searching for a photo – Photo search/Photo scan
Scanning photo
(1) Press SEARCH MODE on the Remote Commander repeatedly, until the photo scan
indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
(2) Press . or >.
Each photo is played back for about 5 seconds automatically.
1
SEARCH
MODE
2
To stop scanning
Press x.
Note
The photo search and photo scan functions work only for tapes recorded in the Digital8
system.
If a tape has a blank portion between recorded portions
The photo search and photo scan functions may not work correctly.
PHOTO 00
SCAN
29