Watching a tape with special performances – Digital effect
(1) Press DIGITAL EFFECT during playback. The digital effect indicator appears.
(2) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode.
(3) Press the SEL/PUSH EXEC dial. The indicator lights up and the bars appear.
(4) Turn the SEL/PUSH EXEC dial to adjust the effect as follows:
DIGITAL
1
EFFECT
To cancel the digital effect function
Press DIGITAL EFFECT again.
24
The indicator changes as follows:
STILL y FLASH y LUMI. y TRAIL
In the STILL and LUMI. modes, the still image is stored in memory.
STILL – The rate of the still image you want to superimpose on the moving
image
FLASH – The interval of flash motion
LUMI. – The color scheme of the area in the still image which is to be masked
with a moving image
TRAIL – The vanishing time of the incidental image
When the number of bars on the monitor screen getting bigger, the digital
effect will be getting bigger.
2
3
4
LUMI.
LUMI.