Basic Operations; Playing Back A Tape; To Stop Playback - Sony GV-D200 Operating Instructions (primary manual) Operating Instructions Manual

— Basic Operations —

Playing back a tape

(1) Connect your VCR to a TV (p. 8).
(2) Prepare the power supply and insert a cassette to play back (p. 8-12).
(3) While pressing the small green button on the POWER switch, set it to ON.
The POWER ON/CHARGE lamp (green) on the front lights up.
(4) Press H to start playback.

To stop playback

Press x.
Notes on the DISPLAY button
• When you connect your VCR to a TV, you can confirm the screen indicators on the
monitor screen.
• Press DISPLAY to display the screen indicators. To make the indicators disappear,
press it again.
DISPLAY
3
POWER
4
REW
OFF ON
PLAY
STOP FF
13