infaco A3M V2.0 Instructions For Using Manual page 16

THE WIRE HAS RETREATED INSIDE THE MACHINE
Try first of all to take hold of the wire at the back of the machine (area 01) and push it
forwards. If the wire emerges (area 03) switch the machine back on and press
control switch 01 to carry out a short cut, then resume tying operations.
01
If the wire does not emerge, unclip lever 01
and pull it right out of the machine.
01
Thread the wire through until it emerges
(area 01). Switch the machine back on and
press control switch 02 to carry out a short
cut .
Version 3
02
Remove the wire; it may be jammed
because of a bend, in which case you
will need to pull firmly to remove it.
Then straighten the wire so that it
threads smoothly through the machine.
Unclip lever 01 and resume tying
operations .
02
01
03
01
-14-