infaco A3M V2.0 Instructions For Using Manual page 10

Position 1 = tight knot.
Pull the machine back approximately 1 to 2
cm, then press the control switch.
To vary the number of turns, move the
wheel 01 to the right or left.
01
Adjustments vary from 3 to 6 turns.
The standard knot adjustment is 4
twists.
Version 3
TIGHTENING THE KNOT
ADJUSTING THE NUMBER OF TURNS.
Position 2 = loose knot.
Pull the machine back approximately 3 to
4 cm, then press the control switch.
The number of twists increases the
holding power of the tie.
3 to 6
twists
Ask your retailer to help you choose
the best compromise to suit your
region, the type of wire you are using
and the tying method.
-8-