Display Section; Stop Button - Sony 3-869-574-12(1) Operating Instructions Manual

e STOP button
Press this button to stop the current tape transport
operation.
C Display section
a Playback format indicators
a Playback format indicators
DVCAM: This lights when a tape recorded in DVCAM
format is played back.
DV: This lights when a tape recorded in consumer DV
format is played back.
LP: This lights when a tape recorded in LP mode is played
back.
12
Location and Function of Parts
b ClipLink indicator
c VITC indicator
d Time data type indicators
g SERVO indicator
f Cassette memory indicator
i REPEAT indicator
Note
No tape transport control buttons other than the EJECT
and STOP buttons will work while the REMOTE button in
the remote control setting section is lit. This can be
changed with the LOCAL ENABLE menu item (see page
38).
e Time counter display
h CHANNEL CONDITION indicators
j Tape end alarm indicator
When a tape recorded in DVCPRO (25M) format or any
other format than those mentioned above is played back,
none of the above indicators lights.
Note
A tape recorded in LP mode cannot be played back
correctly. When a tape recorded in LP mode is played
back, "DV LP" flashes and audio is muted.
k SHUTTLE/JOG indicators