Connections for an A/B Roll Editing System
The following is an example configuration of A/B roll
editing system using the DSR-1600A/1600AP.
Main video monitor
Video signal generator
DME switcher
(DFS-500/500P,
etc.)
52
Connections for an A/B Roll Editing System
Editing control unit
(PVE-500, etc.)
DSR-1600A/1600AP (player 1)
Video signal
Audio signal
Reference video signal
Control signal
The purpose of the following figure is to clearly indicate
the flow of signals among the component devices in this
system. The specific connections and settings are
described beginning on page 53.
Source video monitor
DSR-1800A/
1800AP (recorder)
a) An I/O delay of several frames occurs on DME switchers and other
devices equipped with frame memory. It is therefore necessary to
connect an audio delay unit between the audio mixer and the recorder
VCR to adjust for the delay.
Audio system monitor
DPS-D7 or other delay
a)
unit
Audio mixer
(MXP-290, etc.)
UVW-1600/1600P,
etc. (player 2)