Irritrol Climate Logic User Manual page 7

4. The Receiver Module will automatically* synchronize time
and date with the host controller upon initial power-up.
* Note: Does not apply to TMC-212 controller.
m.
5. Verify that the time and date are synchronized correctly.
If necessary, adjust the Receiver Module as follows:
ring
Note: The display will automatically return to the Home screen
if a key is not pressed within 60 seconds.
de
• Press the
(The
• Press the
• Press the
Note: To download the current time and date from the control-
ler, press the
• Press the
value. Press the
setting the current day, year and time.
Note: To change the clock time display format, press the
trol-R
key. To return to the previous screen without making changes,
press the
• When the Receiver Module and controller are synchronized
34 35 36 34 35 36 VC/ VC/ VC/ VC/ 37 38 39 40 41 42 43 37 38 39 40 41 42 43
COM COM COM COM
to the current time and date, press the
34 35 36 34 35 36 VC/ VC/ VC/ VC/ 37 38 39 40 41 42 43 37 38 39 40 41 42 43
COM COM COM COM
• Press the
VC/ VC/ VC/ VC/
10 11 12 10 11 12 13 14 15 16 17 18 19 13 14 15 16 17 18 19
COM COM COM COM
10 11 12 10 11 12 VC/ VC/ VC/ VC/ 13 14 15 16 17 18 19 13 14 15 16 17 18 19
COM COM
COM COM
key to display the Main Menu screen.
MENU
menu option is selected by default.)
CLOCK
key to display the Clock review screen.
ENTER
key to display the Set Clock screen.
SETUP
key. When prompted, press the
GET
or key to adjust the selected (underscored)
key to select the next value. Continue
NEXT
key.
CANCEL
key two times to return to the Home screen.
EXIT
key. .
YES
12/24
key.
SAVE
Receiver Module Installation and Setup
Main Menu
Timer
Clock
Location Remote
Setup Utility
Sensor
EXIT ENTER
Clock
03/15/2011 02:06P
EXIT SETUP GET
Set Clock
03/15/2011
MONTH
02:06P
SAVE CANCEL 12/24 NEXT
7