Rain/Freeze Sensor Control Feature - Irritrol Climate Logic User Manual

Rain/Freeze Sensor Control Feature

When rain or a low temperature condition is detected, system
operation is placed on hold. The Sun icon is replaced with the
corresponding Rain Cloud or Snow Flakes icon. The LED status
indicator is on continuously while the system is on Hold.
When weather conditions improve, the Climate Logic system
automatically resets for normal operation. An adjustable
Dry-out period will prevent automatic watering for 12 hours (by
default) before scheduled watering can resume. The Dry-out
mode is adjustable from 0 to 3 days, in 1/2-day increments.
To adjust the Dry-out time period, refer to the Dry-out Days
setup procedure on page 14.
Note: To resume watering operation immediately after the reset,
press the key to skip the Dry-out mode.
BYPASS
Smart Bypass Mode: While the system is on hold, sensor control
can be toggled Off and On by pressing the
Bypass mode will be indicated on the Home screen, and the
LED indicator will blink continuously. Watering operations can
resume, however the Climate Logic system will remain in the
Bypass mode until the system automatically resets after the
Dry-out duration times out.
Note: To resume sensor control mode, press the
to toggle the Bypass mode Off.
16
Rain/Freeze Sensor Control Feature
CLIMATE LOGIC
52
F
Rain - No Irrigation
10:15
a
MENU
key. The
BYPASS
key again
BYPASS
CLIMATE LOGIC
40% 32
F
Cold - No Irrigation
11/16 3:15
a
BYPASS MENU
CLIMATE LOGIC
52 40%
F
Dry Out Remain 12h
10:15 11/16
a
MENU BYPASS
CLIMATE LOGIC
52 40%
F
Rain Sensor - Bypassed
10:15 11/16
a
BYPASS
MENU
Wate
The Clim
ment fa
40%
shot is
The gra
1/10
with th
BYPASS
Pressin
large-sc
adjustm
key disp
2-mont
Waterin
format,
Menu.
The His
each da
the bot
data scr
Note: D
use only