Weather Sensor Identification Feature - Irritrol Climate Logic User Manual

Weather Sensor Identification Feature

Within the Sensor Setup screen, the Weather Sensor ID can be
easily viewed, and pairing removed/replaced as needed.
• From the Home screen, select the Main Menu Sensor option
(
MENU_SENSOR_ENTER).
paired Weather Sensor will be displayed.
• To remove and replace the currently-paired Weather Sensor,
press the key to display the Remove Sensor screen.
REMOVE
Important: A new Weather Sensor must be activated before it
can be paired with the Receiver Module. See page 9 for details.
• Press the key the display Sensor Setup/Add Sensor screen.
YES
• Press the key to initiate the sensor ID search function.
ADD
• Press and release the Weather Sensor Test Pin to "Ping" the
Receiver Module. When pairing is successful, the 7-digit sensor
ID is displayed.
Sensor Setup
Add Sensor
EXIT
18
Weather Sensor Identification Feature
The ID number of the currently
ADD
Sensor Setup
ET Sensor ID: 0065157
EXIT REMOVE VIEW
REMOVE SENSOR?
NO YES
Sensor Setup
Sensor Found
ET Sensor ID: 0123456
Successful
EXIT
Cont
The Rec
Logic sy
synchro
• From
(
MEN
softw
• Pres
infor
• Pres
time
Rem
The irri
Module
0000 PI
Module
• From
(
MEN
• Pres
• Pres
• Whe