Replacing The Batteries - Nice HSTS2 Instructions And Warnings For Installation And Use

9

REPLACING THE BATTERIES

Caution! – Never use new battery models different from the specified
version.
When the symbol flashes and the red LED is on, this means that the batteries
are almost discharged and should be replaced (or recharged, if rechargeable)
as soon as possible. If they are completely dead, it is necessary to replace
them (or recharge them) immediately. When batteries are partially discharged,
the radio range between devices is reduced and system operation is not guar-
anteed. Replace the batteries to restore the regular function. Use 2 1.5 V bat-
teries type AA.
01. Open the cover (fig. 41); press on point 1 and then push the bottom
upwards (point 2);
02. Replace the batteries with 2 of the same type, observing the polarity
shown;
03. Close the lid.
Disposal of batteries
Caution! – The batteries in the devices present in this alarm system,
also if discharged, contain pollutant substances and therefore must not
be disposed of as household waste. Dispose of according to "separate"
waste collection methods as envisaged by current local standards.
16 – English
2
1
41
3
4
4
3
2
2
1
1
4
3