Skier's Choice Moomba Series 2019 Owner's Manual page 72

Table of Contents

Advertisement

O
E
W
PTIONAL
NGINE
ATER
The optional Engine Strainer and Fresh Water Flush
kit has a valve speci cally designed to allow you to
attach a garden hose to your engine water intake to
ush brackish or salt water out of your engine. To
use the Fresh Water Flush, simply attach a garden
hose to the valve. Turn on the water to the valve.
Start the engine. Monitor the exhaust ports on the
transom of your boat and engine temperature gauge.
Water should come out of the exhaust ports while
the engine is running. It is recommended that you
run the engine at a low RPM while ushing, since the
engine's raw water pump at higher RPMs can pump
more water than the garden hose can supply. If you
have questions on the operation of your Fresh Water
Flush kit, consult your Moomba Dealer.
© 2018 Skier's Choice, Inc.
S
F
TRAINER AND
LUSH
The optional engine water strainer is a lter for the engine
cooling water. It is recommended for boats that are going to
be operated in weedy conditions or other areas where debris
could clog the engine. It consists of a stainless steel mesh lter
inside a clear cup. It is located between the water intake on the
bottom of the boat and the engine's raw water pump. It should
be checked periodically for debris as conditions dictate. To
remove debris, unscrew the clear sight cup, remove the o-ring
and stainless steel lter mesh and proceed to rinse out the cup.
Be sure to reinstall the lter mesh and o-ring before reattaching
the sight cup to the inlet.
71

Advertisement

Table of Contents
loading

Table of Contents