Skier's Choice Moomba Series 2019 Owner's Manual page 58

Problem
Pump turns on, but does
not pump water
Pump will not turn on
Pump will not turn on
Pump will not turn on
When bags begin to vent, shut o the pump!
DO NOT OVERFILL BALLAST BAGS!
© 2018 Skier's Choice, Inc.
B T
ALLAST ROUBLE
Possible Cause
1)Water intake ball valves are not open
Pump not priming
2)Kink in hose
3)Impeller wornCheck ballast power
Check power to all areas
System needs reset
Check 60 amp ballast breaker at the
Ballast breaker is tripped
engine compartment
Check ballast power wires at the PDM
Ballast power wires not
connected to PDM
S G
HOOTING UIDE
Action
wires at the PDM
Correction
1)Open ball valves
2)Check hoses for kinks and
straighten as needed
3)Check hose connections and
tighten if loose.
4)Replace Impeller
Turn power o to the system at the
breaker and then back on and test
pump
Reset ballast breaker
Connect power wires to PDM
57