Verilux ClearWave CW01 Manual page 17

Instructions, Operation and Directions for Use — continued
Directions for Using the ClearWave
Step 4
Step 3
Step 5
Step 4
Step 4
Step 3
CW01_MAN_Rev52.indd 17
To Charge WITHOUT Charging Stand:
Step 1 Connect the power adapter to the
device and adapter into a 110 VAC
grounded electrical outlet.
Step 2 The Battery Life Indicator Lights will
provide information to you on the
status while charging.
Step 3 When all 3 Battery Indicator Lights are
illuminated (as shown), the battery is
fully charged and the device is ready
for use.
Phototherapy System for Acne
®
Normal Use Operation
Step 1 Wash your face or the area which will be
treated with the ClearWave device with a
neutral pH cleanser.
Step 2 Verify that you know the area you will treat
and the location of the button to activate
the device as the goggles may reduce
your visibility.
Step 3 Put on the goggles provided with the unit.
Ensure that the goggles are fitting snugly
and are not cracked.
Step 4 Before placing the device onto your skin,
activate the device by pushing the power
button until it beeps one time.
17
8/2/11 12:38 PM