Instructions, Operation And Directions For Use - Verilux ClearWave CW01 Manual

Instructions, Operation and Directions for Use

Getting Started
Before you use the ClearWave
battery (see page 21 - How to replace the battery) and fully charge the device. It
takes approximately 12 hours to fully charge the battery for the first time.
CW01_MAN_Rev52.indd 16
CARE & CLEANING
Phototherapy System, you will need to install the
®
Step 1
Step 2
Step 3
Step 4
Step 5
Step 1 Connect the power adapter
to the Charging Stand and
the adapter into a 110 VAC
grounded electrical outlet.
Step 2 Place the ClearWave
Phototherapy System for Acne on
the Charging Stand as shown.
Step 3 The battery life indicator lights
will provide information to you
on the status while charging.
Step 4 When all 3 battery indicator lights
are illuminated, the battery is fully
charged and the device is ready for
use. Once fully charged, the indicator
lights will illuminate for 3 minutes,
and then turn off.
16
8/2/11 12:38 PM