Using The Accessories - Electrolux KODDP71X User Manual

8. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
8.1 Using the core temperature
sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
oven turns off.
There are two temperatures to be set:
• The oven temperature. Refer to the
table for roasting.
• The core temperature. Refer to the
table for the core temperature sensor.
CAUTION!
Only use the core
temperature sensor supplied
with the oven, or genuine
replacement parts.
1. Set the oven function and the oven
temperature.
2. Put the point of the core temperature
sensor (with the symbol
handle) into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the top of
the cavity.
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
When you use the core temperature
sensor for the first time, the default
core temperature is 60 °C. While
flashes, you can use the knob for the
temperature to change the default
core temperature.
The display shows the symbol of the
core temperature sensor and the default
core temperature.
4. Press
temperature, or wait 10 seconds for
the setting to be saved automatically.
The new default core temperature is
displayed during the next use of the core
temperature sensor.
When the meat is at the set core
temperature, the symbol for the core
temperature sensor
core temperature flash. The signal
sounds for 2 minutes.
5. Press any button or open the oven
door to stop the signal.
6. Remove the plug of the core
temperature sensor from the socket.
Remove the meat from the oven.
7. Turn off the oven.
on the
Every time you put the core temperature
sensor in the socket, you need to set the
core temperature time again. You cannot
select the duration and end time.
When the oven calculates the provisional
duration time for the first time, the symbol
flashes in the display. When the
calculation ends, the display shows the
duration of the cooking. Calculations run
in the background during the cooking
and the duration value in the display is
updated if necessary.
You can change the temperature at any
time during the cooking:
1. Press
• one time - the display shows the
• two times - the display shows the
to save the new core
and the default
WARNING!
Be careful when you remove
the tip and plug of the core
temperature sensor. The
core temperature sensor is
hot. There is a risk of burns.
:
set core temperature; if desired, it
can be modified within 5 seconds.
current oven temperature.
ENGLISH 13