Description Of The Chart; The Appropriate Chart For The Device - Siemens MTCO 1324 Operating Instructions Manual

Description of the chart

The appropriate chart for the device

(Page 150, figure IV)
When using (ordering) charts, always
ensure that the full-scale value (1)
and the approval mark (2) of the
MTCO 1324 correspond to the details
(3) or (4) on the chart respectively.
Standard chart
100-24 EC 4K
100-3300-24 EC 4K
125-24 EC 4K
125-3300-24 EC 4K
140-24 EC 4K
180-24 EC 4B
EC = Chart for the EEC tachograph
= Chart for the device design with rpm recording (option),
e.g. Type: 1324.50111...
36
Outside the EU, the respective national ap-
proval marks and provisions are valid.
Depending on the full-scale value and the de-
vice design, you may use the following charts
within the MTCO 1324:
Chart for electronical evaluation Approval mark
100-24/2 EC 4B
100-3300-24/2 EC 4B
125-24/2 EC 4B
125-3300-24/2 EC 4B
140-24/2 EC 4B
e1-83
e1-85
e1-83
e1-85
e1-83
e1-83
Kienzle MTCO 1324