Setup Security Menu; Setup Test Pattern Menu; Setup Remote Settings Menu; Setup Projector Id Menu - Optoma DLP User Manual

USING THE PROJECTOR

Setup security menu

Security
Enable this function to prompt for a password before using the projector.
‡ On: Choose "On" to use security verification when the turning on the projector.
‡ Off: Choose "Off" to be able to switch on the projector without password verification.
Security Timer
Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this
time has elapsed you will be requested to enter your password again.
Change Password
Use to set or modify the password that is prompted when turning the projector on.

Setup test pattern menu

Test Pattern
Select the test pattern from green grid, magenta grid, white grid, white, or disable this function (off).

Setup remote settings menu

IR Function
Set the IR function setting.
‡ On: Choose "On", the projector can be operated by the remote control from the top and front IR
receivers.
‡ Front: Choose "Front", the projector can be operated by the remote control from the front IR receiver.
‡ Back: Choose "Back", the projector can be operated by the remote control from the rear IR receiver.
‡ Off: Choose "Off", the projector can't be operated by the remote control. By selecting "Off", you will be
able to use the Keypad keys.
F1/F2/F3
Assign the default function for F1, F2, or F3 between Test Pattern, Brightness, Contrast, Sleep Timer, Color Temp,
Gamma, Projection, or MHL.

Setup projector ID menu

Projector ID
ID definition can be set up by menu (range 0-99), and allow user control an individual projector by using RS232 command.
41
English