Display Image Settings Menu - Optoma DLP User Manual

USING THE PROJECTOR
Display menu

Display image settings menu

Display Mode
There are many factory presets optimized for various types of images.
‡ Presentation: This mode is suitable for showing in front of public in connection to the PC.
‡ Bright: Maximum brightness from PC input.
‡ HDR: Decodes and displays High Dynamic Range (HDR) content for the deepest blacks, brightest
whites, and vivid cinematic color using REC.2020 color gamut. This mode will be automatically
enabled if HDR is set to ON (and HDR Content is sent to projector – 4K UHD Blu-ray, 1080p/4K UHD
HDR Games, 4K UHD Streaming Video). While HDR mode is active, other display modes (Cinema,
Reference, etc.) cannot be selected as HDR delivers color that is highly accurate, exceeding the color
performance of the other display modes.
HLG: For HDR movies with Hybrid Log content.
‡
‡ HDR SIM.: Enhances non-HDR content with simulated High Dynamic Range (HDR). Choose this
mode to enhance gamma, contrast, and color saturation for non-HDR content (720p and 1080p
Broadcast/Cable TV, 1080p Blu-ray, non-HDR Games, etc). This mode can ONLY be used with non-
HDR content.
‡ Cinema: Provides the best colors for watching movies.
‡ Game: Select this mode to increase the brightness and response time level for enjoying video games.
‡ sRGB: Standardized accurate color.
‡ DICOM SIM.: This mode can project a monochrome medical image such as an X ray radiography,
MRI, etc.
‡ HDR2: This mode produces less bright image but adds more details to the projected image. Suitable
for rooms with some ambient light.
‡ HLG2: This mode provides a balance of dynamic range and noise reduction.
‡ 3D: To experience the 3D effect, you need to have 3D glasses, make sure your PC/portable device
has a 120 Hz signal output quad buffered graphics card and have a 3D Player installed.
Wall Color
Use this function to obtain an optimized screen image according to the wall color. Select between off, blackboard,
light yellow, light green, light blue, pink, and gray.
Dynamic Range
Configure the High Dynamic Range (HDR) setting and its effect when displaying video from 4K Blu-ray players and
streaming devices.
Note: HDMI1 and VGA do not support Dynamic Range.
 HDR/HLG
‡ Off: Turn off HDR or HLG processing. When set to Off, the projector will NOT decode HDR or HLG
content.
‡ Auto: Auto detect HDR or HLG signal.
 HDR Picture Mode
‡ Bright: Choose this mode for brighter more saturated colors.
‡ Standard: Choose this mode for natural looking colors with a balance of warm and cool tones.
‡ Film: Choose this mode for improved detail and image sharpness.
‡ Detail: The signal comes from OETF conversion to achieve the best color matching.
32 English