Advertisement
en
en
en
Side-by-side
Side-by-side
Side-by-side
. . . without partition
. . . without partition
. . . without partition
If the appliances are installed directly
next to each other (without a partition),
If the appliances are installed directly
If the appliances are installed directly
they need to be attached together. A
next to each other (without a partition),
next to each other (without a partition),
heating mat must also be installed. This
they need to be attached together. A
they need to be attached together. A
will help avoid condensation and
heating mat must also be installed. This
heating mat must also be installed. This
prevent damages.
will help avoid condensation and
will help avoid condensation and
prevent damages.
prevent damages.
HEATING MAT DETAILS FOR KSK
202
4
4
4
KSK 2002- Heating mat connects directly to left-stand-
•
ing appliance
•
Merging kit must be used when combining units
•
All Installations must be done in accordance with local codes
Side-by-Side Merging Kit
KSK 2002
. . . with partition
The minimum thickness of the partition
. . . with partition
. . . with partition
5
is
/
" (16 mm).
8
The minimum thickness of the partition
The minimum thickness of the partition
If there is a partition with a thickness
5
is
/
" (16 mm).
5
is
/
" (16 mm).
8
less than 6
8
/
" (160 mm)
5
5
from
/
" (16 mm) to 6
5
/
" (160 mm)
16
8
16
If there is a partition with a thickness
If there is a partition with a thickness
between the adjacent appliances, then
5
5
from
/
" (16 mm) to 6
/
" (160 mm)
5
5
from
/
" (16 mm) to 6
/
" (160 mm)
each appliance should be individually
8
16
8
16
between the adjacent appliances, then
between the adjacent appliances, then
installed within its own niche using the
each appliance should be individually
each appliance should be individually
mounting accessories included.
installed within its own niche using the
installed within its own niche using the
mounting accessories included.
mounting accessories included.
In this case, you will only need the
heating mat from the "Merging Kit" to
In this case, you will only need the
In this case, you will only need the
avoid condensation and prevent
heating mat from the "Merging Kit" to
heating mat from the "Merging Kit" to
damages.
avoid condensation and prevent
avoid condensation and prevent
damages.
damages.
In this case, you will only need the heating
mat from the "Merging kit" to avoid conden-
staion and prevent damages. Please be
aware the left unit's cutout will require an
additional
/
" (3 mm) to the width to allow
1
8
installation of the heating mat.
Page 3 of 12
Advertisement
