Cisco Aironet 1530 Series Hardware Installation Manual page 48

Access Point Pinouts
This appendix describes the pin signals of the access point Ethernet connectors, and the power injector
input and output connectors.
Table E-1
Table E-1
Pin Number
1
2
3
6
4
5
7
8
Shield
Table E-2
this table are applicable to AIR-POWERINJ1500. Not all PoE power sources follow these pinouts.
Table E-2
Pin Number
1
2
3
6
4
5
OL-30864-01
describes the pin signals of the access point LAN connector
Access Point LAN Connector Pinouts
Signal Name
Ethernet signal pair (10/100/1000BASE-T)
Ethernet signal pair (10/100/1000BASE-T)
Ethernet signal pair (10/100/1000BASE-T)
Ethernet signal pair (10/100/1000BASE-T)
Chassis ground
describes the pin signals for the access point PoE-in Ethernet connector. The Pinouts given in
Access Point PoE-In Ethernet Connector Pinouts for AIR-POWERINJ1500
Signal Name
Ethernet signal pair (10/100/1000BASE-T) and DC return
Ethernet signal pair (10/100/1000BASE-T) and DC (+)
Ethernet signal pair (1000BASE-T) and DC (+)
Cisco Aironet 1530 Series Outdoor Access Point Hardware Installation Guide
A P P E N D I X
E
E-1