Cisco Aironet 1530 Series Hardware Installation Manual page 49

Table E-2
Pin Number
7
8
Shield
Table E-3
Table E-3
Pin Number
1
2
3
6
4
5
7
8
Shield
Table E-4
given in this table are applicable to AIR-POWERINJ1500. Not all PoE power sources follow these
pinouts.
Table E-4
Pin Number
1
2
3
6
4
5
7
8
Shield
Cisco Aironet 1530 Series Outdoor Access Point Hardware Installation Guide
E-2
Access Point PoE-In Ethernet Connector Pinouts for AIR-POWERINJ1500
Signal Name
Ethernet signal pair (1000BASE-T) and DC return
Chassis ground
describes the pin signals for the power injector input connector (To Switch).
Power Injector Input Connector (To Switch) Pinouts
Signal Name
Ethernet signal pair (10/100/1000BASE-T)
Ethernet signal pair 10/100/1000BASE-T)
Ethernet signal pair (1000BASE-T)
Ethernet signal pair (1000BASE-T)
Chassis ground
describes the RJ-45 pin signals for the power injector output connector (To AP). The Pinouts
Power Injector AIR-POWERINJ1500 Output Connector (To AP) Pinouts
Signal Name
Ethernet signal pair (10/100/1000BASE-T) and DC return
Ethernet signal pair (10/100/1000BASE-T) and DC (+)
Ethernet signal pair (1000BASE-T) and DC (+)
Ethernet signal pair (1000BASE-T) and DC return
Chassis ground
Appendix E Access Point Pinouts
OL-30864-01