Selecting Cd Function; Audio Source Memory Function; Volume Adjustment; Mute/Pause Function - Lancia Ypsilon Owner's Handbook Manual

SELECTING CD FUNCTION

By pressing the MEDIA button briefly it is possible
to select the CD function.

AUDIO SOURCE MEMORY FUNCTION

If another function (e.g. the radio) is selected
whilst listening to a CD, playback is interrupted
and is resumed from the same point when
returning to the CD source.
If another function is selected whilst listening to
the radio, the last station selected is tuned into
when returning to the Radio mode.

VOLUME ADJUSTMENT

Turn the (ON/OFF) button/knob to adjust the
volume.
If the volume level is changed during the
transmission of traffic news, the new setting will
only be maintained until the update is finished.

MUTE/PAUSE FUNCTION

(volume reset)
Press the button briefly to activate the Mute
function. The volume will gradually decrease and
the words "RADIO Mute" (in radio mode) or
"PAUSE" (in CD mode) will appear on the
display.
Press the button again to deactivate the Mute
function. The volume will gradually increase until
it reaches the level previously set.
When the volume level is changed using the
dedicated controls, the Mute function is
deactivated and the volume is adjusted to the new
level selected.
With the Mute function activated, it will be
ignored when there is an incoming traffic alert (if
the TA function is activated), or if an emergency
alarm is received. The function will be reactivated
when the alert is over.

AUDIO SETTINGS

The functions in the audio menu differ according
to the activated source: AM/FM/CD/Media Player
(only with Blue&Me™) /AUX (only with
Blue&Me™, for versions/markets, where
provided).
Press the button briefly to change the Audio
functions.
After the button is first pressed, the display will
show the bass level value for the source activated
at that time (e.g. in FM mode the display will
show the wording "FM Bass +2").
Use the or buttons to scroll the menu
functions. To change the setting of the function
selected use the or buttons. The current status
of the selected function appears on the display.
The functions managed by the Menu are:
❒ BASS (adjustment of bass tones);
❒ TREBLE (adjustment high tones);
❒ BALANCE (right/left balance adjustment);
273