Lancia Ypsilon Owner's Handbook Manual page 170

CHANGING A BULB
GETTING TO KNOW
GENERAL INSTRUCTIONS
YOUR CAR
❒ Before changing a bulb check the contacts for
oxidation;
❒ Burnt bulbs must be replaced by others of the
SAFETY
same type and power;
❒ after replacing a headlight bulb, always check
its alignment;
STARTING AND
❒ when a light is not working, check that the
DRIVING
corresponding fuse is intact before changing
a bulb. For the location of fuses, refer to the
paragraph "If a fuse blows" in this section;
WARNING LIGHTS
AND MESSAGES
Modifications or repairs to the
IN AN EMERGENCY electric system that are not carried
out properly or do not take the system
technical specifications into account can
cause malfunctions leading to the risk of
SERVICING AND
fire.
MAINTENANCE
TECHNICAL
SPECIFICATIONS
Halogen bulbs contain pressurised
gas, in the case of breakage they may
burst.
INDEX
168
WARNING
WARNING
Halogen bulbs must be handled
holding the metallic part only.
Touching the transparent part of the
bulb with your fingers may reduce the
intensity of the emitted light and even reduce
the lifespan of the bulb. In case of accidental
contact, wipe the bulb with a cloth moistened
with alcohol and let the bulb dry.
If possible, we recommend that you
have bulbs replaced at a Lancia
Dealership. The correct operation and
aiming of the outer lights are absolutely
essential for the safety of the car and of
compliance with law.
Due to the high supply voltage, Xenon
gas-discharge bulbs (for versions/
markets, where provided) must only be
replaced by a specialist technician: danger of
death! Contact a Lancia Dealership.