Lancia Ypsilon Owner's Handbook Manual page 156

START&STOP SYSTEM ACTIVATION/
DEACTIVATION
GETTING TO KNOW
YOUR CAR
START&STOP SYSTEM FAILURE
Start&Stop system activation
A message will be displayed when the Start&Stop
SAFETY
system is on. In this condition the LED on the
button on the dashboard control panel (see
"Start&Stop" in the chapter "Knowing your car")
STARTING AND
is off.
DRIVING
Turning the Start&Stop off
❒ Versions with reconfigurable multifunction
display: a message appears on the display when
WARNING LIGHTS
the Start&Stop system is deactivated.
AND MESSAGES
❒ Versions with reconfigurable multifunction
display: the
the display when the Start&Stop system is
IN AN EMERGENCY
deactivated.
The LED on the
is deactivated.
SERVICING AND
START&STOP SYSTEM FAILURE
MAINTENANCE
Versions with multifunction display: a
Start&Stop system failure is indicated by the
TECHNICAL
switching on of the
SPECIFICATIONS
instrument panel and a message on the display.
Versions with reconfigurable multifunction
display: the
appears on the display in the event of a
INDEX
Start&Stop system failure.
In the event of a Start&Stop system failure,
contact a Lancia Dealership.
154
symbol and a message appear on
button is on when the system
warning light on the
icon switches on and a message
POSSIBLE ICE ON ROAD
(for versions/markets where provided)
On the versions equipped with reconfigurable
multifunction display, a message + symbol appear
on the display when the outdoor temperature
falls to or below 3°C.
IMPORTANT In the event of outdoor temperature
sensor failure, dashes are shown on the display
instead of the value.
ECO FUNCTION ACTIVATION/
DEACTIVATION (0.9 TwinAir 85 HP versions)
The ECO function activation/deactivation by
pressing the corresponding button (see the
paragraph "Controls" in the chapter "Knowing
your car") is indicated by a message on the
display.