Lancia Ypsilon Owner's Handbook Manual page 162

❒ position the jack under the car, near the wheel
to be changed;
GETTING TO KNOW
❒ operate the device A fig. 114 to extend the jack
YOUR CAR
until the top of the jack B fig. 115 fits correctly
into the side member C (next to the mark on
the side member);
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
fig. 111
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 112
160
❒ alert other passengers that the car is about to be
raised; all persons should be kept away from the
car until it has been lowered;
❒ fit handle D fig. 114 into the housing in device
A, operate the jack and raise the car until the
wheel is a few centimetres from the ground;
❒ remove the wheel cap after loosening the 3
fixing bolts and finally loosen the fourth bolt
and extract the wheel (only for versions with
wheel caps fixed by bolts);
❒ make sure the contact surfaces between
space-saver wheel and hub are clean so that the
fastening bolts will not come loose;
❒ fit the space-saver wheel by inserting the first
bolt for two threads into the hole closest to the
valve;
❒ take the wrench A fig. 113 and fully tighten the
fixing bolts;
L0F0099
fig. 113
L0F0183 L0F0179