Installing The Cisco Microsoft Windows 7 Usb Driver; Uninstalling The Cisco Microsoft Windows Usb Driver; Uninstalling The Cisco Microsoft Windows Xp And 2000 Usb Driver - Cisco Catalyst 6840 Series Hardware Installation Manual

Installing the Cisco Microsoft Windows 7 USB Driver

Note
Step 2 Double-click the setup.exe file.
Step 3
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 4 The Ready to Install the Program window appears. Click Install.
Step 5
The InstallShield Wizard Completed window appears. Click Finish.
Step 6
Connect the USB cable to the PC and the switch console port. The USB console port LED turns green, and
the Found New Hardware Wizard appears. Follow the instructions to complete the driver installation.
Installing the Cisco Microsoft Windows 7 USB Driver
Procedure
Step 1
Obtain the Cisco USB console driver file from the Cisco.com web site and unzip it.
Note
Step 2
If using 32-bit Windows 7, double-click the setup.exe file in the Windows_32 folder. If using 64-bit Windows
7, double-click the setup(x64).exe file in the Windows_64 folder.
Step 3 The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 4 The Ready to Install the Program window appears. Click Install.
Note
Step 5 The InstallShield Wizard Completed window appears. Click Finish.
Step 6
Connect the USB cable to the PC and the switch console port. The USB console port LED turns green, and
the Found New Hardware Wizard appears. Follow the instructions to complete the driver installation.

Uninstalling the Cisco Microsoft Windows USB Driver

Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver

Use the Windows Add or Remove Programs utility or the setup.exe file.
Using the Setup.exe Program
Before you begin
Disconnect the switch console terminal before uninstalling the driver.
Catalyst 6840-X Switch Series Hardware Installation Guide
86
You can download the driver file from the Cisco.com site for downloading the switch software.
You can download the driver file from the Cisco.com site for downloading the switch software.
If a User Account Control warning appears, click Allow - I trust this program to proceed.
Installing the USB Drivers