Installation
EN
4.
Open the shut-off devices in front of and behind the
pump.
5.
Check impermeability.
5.7.2
Install threaded pipe union pump
WARNING
The pipes can be hot. Injury may occur from burns!
◾
Wear protective gloves.
1.
Install suitable threaded pipe union.
Fig. 10: Close shut-off device.
2.
Close the shut-off devices in front of and behind the
pump.
Fig. 11: Pump installation
3.
Insert the supplied flat gaskets into the pump.
8
4.
Screw together the pump with the union nuts. In doing
so hold it exclusively against the flat faces on the pump
housing.
Fig. 12: Open the shut-off devices.
5.
Open the shut-off devices in front of and behind the
pump.
6.
Check impermeability.
5.8
Insulate
Fig. 13: Insulate, free up condensation drain
Heating applications with fluid temperature > 20 °C
1.
Mount thermal insulation shell (accessories) onto pump
housing.
Cooling and climate applications
1.
Use standard, diffusion-proof insulation materials. Empty
condensation drain