Chapter 4 Replacement Procedures
4.16 Cardreader_USB Board
Removing the Cardreader_USB Board
The following describes the procedure for removing the board.
1. Turn over the machine and remove battery.
2. Remove Top Cover.
3. Remove SCREW M2.5*6.5F 1PCS and unplug USB/B-MB cable
4. Lift up Cardreader_USB Board and get it down.
Figure 4-16-1 Remove screw and unplug USB/B-MB cable
Installing the Cardreader_USB Board
The following describes the procedure for installing the Cardreader_USB Board.
1. Set the board in the fit location.
2. Screw up Cardreader_USB Board with SCREW M2.5*6.5F 1PCS and plug USB/B-
MB cable.
3. Mount top cover.
Satellite L730/Satellite 735/Satellite Pro 730 Maintenance Manual (960-Q08)
55