Chapter 4 Replacement Procedures
Installing the Top Cover Assembly with speaker
The following describes the procedure for installing the Top Cover Assembly.
1. Secure the speaker with the following screws M2.0*5.5F 4PCS.
2. Connect speaker cable to MB and install the Top Cover Assembly to the Base
assembly.
NOTE: Be careful not to catch the cables between Top Cover Assembly and base
assembly.
3. Connect the Touch Pad FFC and Keyboard cable to the connector on the system
board.
4. Secure the following screws M 2.5*6.5F 3PCS securing the Top Cover Assembly
from the front of computer.
5. Install Keyboard screw M 2.0x3F 2PCS.
6. Secure the screws M 2.5*6.5F 8PCS in the Base.
Satellite L730/Satellite 735/Satellite Pro 730 Maintenance Manual (960-Q08)
29