Chapter 4 Replacement Procedures
4.8
WLBT Module
NOTE: In the design right now, only one card will be used to achieve the function of
wireless and Bluetooth. It is shortly called "WLBT" at below.
Removing WLBT Module
The following describes the procedure for removing WLBT module.
1.
Turn over the machine and remove battery.
2.
Remove keyboard ( See former Keyboard removing process)
3.
Unplug the wireless connector.(Figure 4-8-1)
4.
Remove SCREW M2.0x3.0F 1PCS and take off WLBT from the connector on the
system board. (Figure 4-8-2)
Satellite L730/Satellite 735/Satellite Pro 730 Maintenance Manual (960-Q08)
Figure 4-8-1 Unplug WLBT connector
33